modbar Pour-Over, Manual, Page: 21 / 58

EN
21
4) Profile Selection Screen:
Back button: Wherever you see the back
button it will take you to the previous
screen.
Manual profile: This is a factory set profile.
When assigned to either of the dispensing
switches (or both) the switch(s) will operate
in a simple on/off (manual) dispensing
mode. For this profile only temperature
edit is allowed. In this example the Manual
Profile is assigned to both the Left and Right
switches, indicated by a teal blue “L” and
“R” next to the profile name
Inactive profile: This is a profile that has
profile information but is not active,
indicated by a purple/grey filled circle.
Empty profile: These are empty profile slots
and may not be used until profiling data is
entered. Empty profiles are indicated by a
non-filled circle.
Assign Left: Pressing this button will assign
the current cursor selected profile to the
Left dispensing switch. (You cannot assign
an empty profile)
Assign Right: Pressing this button will assign
the current cursor selected profile to the
Right dispensing switch.
Profile edit: Press the profile edit button to
edit the profile data for the current cursor
selected profile.
Cursor select: The dotted outline cursor
select indicates which profile is selected on
screen. You may use the rotary encoder or
up/down function of the joystick to navigate
the profiles list. Pressing the pushbutton
will activate a selected profile.
5) Steps to creating a new pour-over profile:
5.1. Select an empty profile (indicated by a
non-filled circle) and choose edit.
5.2. Touch next to the Profile Name field
and enter a name for the profile. Use the
joystick and encoder wheel to navigate the
alpha-numeric character set.
5.3. Set the heat zone temperatures if
desired. To change the set temperature,
simply touch the temperature value on the
screen and the value will be highlighted.
Rotate the encoder left or right to change
the value in 1-degree increments. Press
the joystick up or down to change the
temperature in 1/10 degree increments.
Press the center button on the joystick to
save the change.
• In manual temperature mode, both boiler
heat zones will be displayed. Set the
Inlet Boiler Temperature (Inlet-T) and
Outlet Boiler Temperatures (Outlet-T) if
so desired.
• In automatic temperature mode, only one
temperature will be displayed. Set the
brew temperature (Temp) if so desired.
(Refer to “Advanced preferences screen2”
for temperature mode information)
5.4. If you want to program the profile
parameters manually, touch the Manual
Programming box. It will turn red and the
Brew Settings option will disappear.