5. Dwell time: Set the amount of time that an alarm continues when the alarm is triggered. Dwell time
ranges from 1 to 1000 seconds.
6. Delay before alarm: Alarm will trigger when selective motion past the set time (between 20 to 1800
seconds).
7. Alarm at: Alarm will trigger when the number of object reaches or exceeds the set number.
8. Reset counter on alarm: Check to reset object count, or un-check to restart object counting function
from zero.
9. Click
to save the settings.
Camera Fisheye Setup
The NVR supports dewarping settings for fisheye cameras depending on the camera’s DSP. Select fisheye cam-
era channel and click
Camera Fisheye Setup
on the left to display the settings.
Fisheye Dewarping Type
Front End: Front End dewarping is mainly for fisheye camera equipped with dewarping function. Select
Front End
and choose which installation method under
Installation
according to the camera mounting
method.
n
Click
to save the settings, or click
to reload the settings.
The following includes dewarping view modes under
Stream 1 View Mode
and
Stream 2 View Mode
for
Ceiling/Wall mount installation.
n
Stream 1 View Mode
Users can view the live streaming video without dewarping.
System User Interface Introduction
Camera Fisheye Setup
31 / 85
