Mitsubishi SRR60ZJ-S, Service Manual

Page: 12 / 162

-
11
-
'10 • SCM-SM-094
(c) Swing
1)
Swing flap
Flap moves in upward and downward
directions continuously.
2)
Swing louver
Louver moves in left and right directions continuously.
Note (1) value in ( ) are for the model SRK20~50ZJ-S.
(d) Memory flap (Flap or Louver stopped)
When you press the AIRFLOW (UP/DOWN or LEFT/RIGHT) button once while the flap or louver is operating, it stops swinging
at the position. Since this angle is memorized in the microcomputer, the flap or louver will automatically be set at this angle when
the next operation is started.
(e) When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
In HEAT operation In COOL, DRY, FAN operation
Approx. 20°(25°)
Approx. 75°(70°)
Approx.5°(10°)
Approx. 60°
4
SRF series
Control the flap by AIRFLOW


(UP/DOWN) button on the wireless remote controller.
(a) Flap
Each time when you press the AIRFLOW


(UP/DOWN) button the mode changes as follows.
(b) Swing
1) Swing flap
Flap moves in upward and downward directions continuously.
(c) Memory flap (Flap stopped)
When you press the AIRFLOW button once while the flap is operating, it stops swinging at the position. Since this angle is mem -
orized in the microcomputer, the flap will automatically be set at this angle when the next operation is started.
(d) When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
COOL , DRY, FAN
Remote controller
display
HEAT
Approx. 60°
Approx. 44° Approx. 50°
Approx. 32° Approx. 38°
Approx. 21.5°
Approx. 5°
Approx. 21.5°
Approx. 12° Approx. 12°
Angle of Flap from Horizontal
(Swing)
(Flap stopped)
Approx.60°
Approx.12°
Approx.44°
Approx.5°
In HEAT operation In COOL, DRY, FAN operation
Approx. 45°
Approx. 75°
Approx.
5°
Approx. 60°