Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 92 / 140

Program Operating Procedures 8
8-12
FX
2N
-1RM-E-SET Programmable Cam Switch
8.2.10 Reading/setting the reference angle
Set the current position of the resolver as the reference angle.
The reference angle is used as common in all the banks.
Connect the resolver to the FX
2N
-1RM before turning on the power.
[Power ON][PRG mode]
BANK
b
OUT
Ad
STEP
Blank
DEG ON LED
Exting-
uished
OFF LED
< Key operation >
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
< Display >
*1 The reference angle already registered
flashes. The initial value is 0.
ADJ
Display the reference angle.
Read procedure
CLR
Return the display to the
previous status.
BANK
0
OUT
0
STEP
0
DEG ON LED
Lit
OFF LED
*2 The ON angle of the output Y00 already
registered is displayed.
###
flashes
*1
Exting-
uished
Exting-
uished
### *2
BANK
b
OUT
Ad
STEP
Blank
DEG
###
flashes
*1
ON LED
Lit
OFF LED
< Key operation >
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
< Display >
*1 The reference angle already registered
flashes. The initial
ADJ
Display the reference angle.
Setting procedure
0 1 0
Enter a numeric to be treated as
reference.
Rotate the resolver,
and stop it in an
arbitrary position.
GO
The current position in which the resolver is
stopped is treated as set value.
The numeric "100" entered flashes on the DEG.
BANK
0
OUT
0
STEP
0
DEG ON LED OFF LED
*2 The ON angle of the output Y00 already
registered is displayed.
Exting-
uished
Exting-
uished
Lit ###*2