Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 51 / 140

Basic Setting 6
6-1
FX
2N
-1RM-E-SET Programmable Cam Switch
6. Basic Setting
This section describes the basic setting of the FX
2N
-1RM including handling of the RUN and
STOP modes, specification of the bank No., setting of the automatic angle advance function and
setting of the reference angle.
Cautions on start-up and maintenance
• Do not touch any terminal while the power is supplied.
If a terminal is touched, electrical shocks or malfunction may occur.
• Turn off the power before cleaning or tightening terminals.
If cleaning or tightening is performed while the power is supplied, electrical shocks may
occur.
• Read thoroughly the manual and confirm safety before modifying a program during
operation, performing forced output, performing the RUN operation or performing the
STOP operation.
Erroneous operation may cause mechanical damages or accidents.
Cautions on start-up and maintenance
• Do not disassemble or modify the unit.
Disassembly or modification may cause failures, malfunction or fires.
* For repair, contact Mitsubishi Electric System Service
• Turn off the power before connecting or disconnecting connection cables such as
extension cables.
If such cables are connected or disconnected while the power is turned on, failures or
malfunction may occur.
Cautions on Disposal
• Treat the unit as industrial waste when disposing of it.