Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 82 / 140

Program Operating Procedures 8
8-2
FX
2N
-1RM-E-SET Programmable Cam Switch
Batch addition of OFF
output set angle Adds specified angle to OFF set angle of specified output at a
time.
PRG 8-25
Batch subtraction of OFF
output set angle Subtracts specified angle from OFF set angle of specified
output at a time.
PRG 8-25
BCD output
(negative logic) Outputs current angle as BCD from a cer tain output No.
(negative logic).
PRG 8-26
BCD reverse output
(positive logic) Outputs current angle as BCD from a cer tain output No.
(positive logic).
PRG 8-26
One-phase pulse output
(180 pulses/rotation) Outputs a pulse string from an arbitrary output No. (One-phase,
180 pulses/rotation).
PRG 8-27
Two-phase pulse output
(90 pulses/rotation) Outputs a pulse string from an arbitrary output No. (Two-phase,
90 pulses/rotation).
PRG 8-27
RUN output Always outputs ON from an arbitrary output No. in RUN mode. PRG 8-28
One-phase pulse output
(60 pulses/rotation) Outputs a pulse string from an arbitrary output No. (One-phase,
60 pulses/rotation).
PRG 8-28
Keyword registration
Registers keyword to prevent write to EEPROM and theft of a
program.
PRG 8-30
Keyword deletion Deletes keyword. PRG 8-30
Item Function Mode
Description
page