Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 113 / 140

Monitor 9
9-1
FX
2N
-1RM-E-SET Programmable Cam Switch
9. Monitor
The display on the data setting panel can be changed over among the current value, the status
and the rotation speed.
This section describes the display change-over procedure and the contents of display.
9.1 Changing over the monitor display
By pressing the [ON OFF] key, the monitor display is changed over in the way "current value
display
→
output/status display
→
rotation speed display".
< Initial display in the RUN mode >
When the power is turned on again, the screen displayed just before the power was turned off is
displayed.
When the mode is changed over in the way "RUN
→
PRG
→
RUN", the screen displayed just
before the mode was changed over from RUN to PRG is displayed.
[Power ON] [PRG mode]
BANK
Executed
bank No.
OUT
Blank
STEP
Blank
DEG
Current
value
RUN
Lit
Press the [ON OFF] key to change over the screen.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●● ●●●●●●●
Y26
Y25
Y24 Y20
Y22
Y23
Y21
Y27
Y16
Y15
Y14 Y10
Y12
Y13
Y11
Y17
Y6
Y5
Y4 Y0
Y2
Y3
Y7
Y36
Y35
Y34 Y30
Y32
Y33
Y31
Y37
Y56
Y55
Y54 Y50
Y52
Y53
Y51
Y57
Y46
Y45
Y44 Y40
Y42
Y43
Y41
Y47
b6
b5
b4 b0
b2
b3
b7
b1
Y1
BANK OUT STEP DEG
Output status
Status
BANK
Executed
bank No.
OUT
rP
STEP
n
DEG
Rotation
speed
(r/min)
RUN
Lit
< Output/status ON/OFF indication >
While LED is lit: The output/status bits are turned on.
While LED is extinguished: The output/status bits are turned off.
Press the [ON OFF] key to change over the screen.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●● ●●●●●●●
Press the [ON OFF] key to change over the screen.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●● ●●●●●●●
< Rotation speed display >
The initial screen is displayed again.