Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 61 / 140

Basic Setting 6
6-11
FX
2N
-1RM-E-SET Programmable Cam Switch
6.7 Current angle transfer function
The current angle transfer function to transfers the current angle of the resolver to BFM#106 via
turning ON input terminal B1.
(This function has been included since V2.40)
The PLC is used together, and a highly accurate sampling by which an external input is made a
trigger can be done.
The response speed becomes 207r/min/0.5degree or 415r/min/degree.
Set to specify the bank from the PLC without fail when you use the current angle transfer
function.
< Setting by the data setting panel >
• Set the method of specifying the bank by operating FNC3, "PLC".
Refer to Paragraph 8.3.4
• Set the current angle transfer function by operating FNC7, "Effective".
Refer to Paragraph 8.3.8
< Setting by the PLC >
• BFM#0 b3 is turned ON, and the method of specifying the bank selects "PLC".
• BFM#0 b7 is turned ON, and the Current Angle Transfer function is made effective.
b7: OFF
→
Current angle transfer function is Invalidity.
ON
→
Current angle transfer function is effective.
Program example
M8000
M0
M1
M2
M8000
M3
M4
M5
M6
M7
M8002
TO K0 K1 K2M0 K1
FROM K0 K106 D0 K1
BFM#106
Reading instruction
Resolution: 1 degree
Rotation derection of resolver: Clockwise
Write protect of EEPROM: Write is enabled
Automatic angle advance function: Un used
Individual automatic angle advance function:
Un used
Prohibition of RUN to PRG operation:
Permission
Current angle transfer function: Used
Bank specification method: PLC
Parameter setting (BFM#0)
BFM#106
→
D0.
M8000
M8000
M8000
M8000
M8000
M8000