Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 39 / 140

Specifications 3
3-3
FX
2N
-1RM-E-SET Programmable Cam Switch
3.2 Performance specifications
3.3 Resolver specifications
Applicable PLC
The bus of an FX
2N
and FX
2NC
series PLC can be connected.
A single drive is also possible. (Refer to subsection 1.5.1.)
Program memory
Built-in EEPROM memory (no battery)
Number of cam
output points
48 internal output points. Data is read by PLC. In addition, 48 points can be con-
nected when transistor output extension blocks or triac output extension blocks
are connected. (When extension blocks are connected, up to 32 points can be
turned on at a time.)
Detector
Brushless resolver (F
2
-720RSV for F
2
-32RM)
Control resolution
720 divisions/rotation (0.5 degree) or 360 divisions/rotation (1 degree)
Response speed
415 r/min/0.5 degree or 830 r/min/degree
When the current angle transfer function is used, response speed becomes
207r/min/0.5degree or 415r/min/degree.
Number of program
banks
8 banks (specified by PLC) or 4 banks (specified by external input)
Setting unit
Dedicated data setting unit (integrated add-on type)
Peripheral equipment for PLC via PLC (Sequence program is required.)
Number of times of
ON/OFF
8 times/cam output
Input
2 bank input points (code input of 0 to 3), 24 VDC, 7 mA, response time 3 ms,
photocoupler isolation
Setting switch
RUN/PRG selector switch and 16 keys (input from data setting panel)
LED indication
POWER, RUN, ERROR, 7-segment
×
7 digits, LED
×
4
Excitation method
Two-phase excitation, 1-phase output (5 kHz)
Mechanical allowable
rotation speed
3000r/min
Cable distance
100 m (3937 inch) maximum
Vibration resistance
In conformance to JIS 0911, 10 to 2000 kHz (15 G maximum), 2 hours in each
of 3 directions
Impact resistance
In conformance to JIS 0912 (50 G, 11 ms, 3 times in each of 6 directions)
Abrasion torque
120 g
⋅
cm
2
or less
Protection structure
IP52 (JEM1030)
Ambient temperature
-10 to +85
°
C