Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 120 / 140

Test 10
10-4
FX
2N
-1RM-E-SET Programmable Cam Switch
OUT 0 GO
Specify the output No.
(Y00 to Y03)
BANK
0
OUT
0
STEP
0
DEG
###
*1
ON LED
Lit
OFF LED
Exting-
uished
< Key operation >
●●●●●●
●●●●●●●●●●●●
●●●●●●●●●●●●
●●●●●●●●●●●
●●●●●●●●●●●●
●●●●●●●●●●●●
●●●●●●●●●●●●
●●●●●●●●●●●
●●●●●●
< Display >
*1: The output set value which has already been
resistered is displayed.
*2: An existing value is displayed.
The DEG display becomes a blinking display
when the [ON OFF] key is pushed, and setting
is possible.
When the [GO] key is pushed, the next set
item is displayed.
Change in individual automatic angle advance function
BANK
S
OUT
Pd
STEP
0
DEG
###
*2
ON LED
Exting-
uished
OFF LED
Exting-
uished
FNC 9 0 GO
ON
OFF
GO
To change the setting of the next item, the
operation is repeated from step 1.
An item can be selected with [+] / [-] key.
•
1 rpm or 1 degree increase
whenever [+] key is pushed.
•
1 rpm or 1 degree decrease
whenever [-] key is pushed.
(The numerical value cannot
be input.)
•
The content of the change is
fixed.
•
The set value is written in
EEPROM.
•
The state of the output
changes.
[+] / [-] the contents of the item
which will be changed with the
key the selection and setting
can be confirmed.
➀
The rotational speed setting of S0 is displayed
by the operation recorded left.
+ -
1 r/min or 1 degree increase whenever [+] key
is pushed.
1 r/min or 1 degree decrease whenever [-] key
is pushed.