Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 90 / 140

Program Operating Procedures 8
8-10
FX
2N
-1RM-E-SET Programmable Cam Switch
8.2.8 Insertion of teaching
Insert the current position of the resolver as the set value.
Connect the resolver to the FX
2N
-1RM before turning on the power.
[Power ON][PRG mode]
BANK
0
OUT
0
STEP
0
DEG
Blank*1
ON LED
Lit
OFF LED
Exting-
uished
< Key operation >
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
< Display >
*1 The ON angle of the output Y00 already
registered is displayed.
0
TEACH
BANK GO
Read the program bank No. 0.
BANK
0
OUT
0
STEP
0
DEG
# # #
flashes*2
ON LED
Exting-
uished
OFF LED
Lit
The angle in the current position flashes on
the DEG.
Start to set the ON angle of
the output Y00.
*2 The current angle flashes.
0 OUT GO
Read the output Y00.
0 STEP GO
Read the step No. 0.
Rotate the resolver,
and stop it in a
position in which it
is to be turned on.
The OFF LED is lit to indicate that the process
has proceeded to setting of the OFF angle of the
same step.
BANK
0
OUT
0
STEP
1
DEG
# # #
*3
ON LED
Lit
OFF LED
Exting-
uished
*3 The step No. 1 (former step No. 0) shifted
downward by insertion is displayed.
GO
Determines the OFF angle.
CLR
Nothing is displayed on the DEG to indicate
that the insertion mode is selected.
Determine the ON angle.
Starts to set OFF of the output
Y00.
Rotate the resolver,
and stop it in a
position in which it
is to be turned on.
GO
ON
OFF
or
Select the insertion mode.