7/79
BCN-P5999-1305-1c
1. OUTLINE
This manual explains the sample screens of GOT2000 connected to a FR-E800-E inverter via Ethernet. The sample
screens can be used to change the running speed, rotation direction, and the parameters as well as to monitor the
current values and execute machine diagnosis (load characteristics measurement).
By changing the controller settings, the following connections are supported.
(a) When connecting GOT2000 to inverter FR-E800 in RS-485 connection.
(b) When connecting GOT2000 to MELSEC iQ-R/Q/L series PLC and then connecting the PLC to inverter FR-E800-E
via Ethernet interface unit/CC-Link IE TSN master/local module.
Please refer to "7. User Customize" for how to change [Controller Setting] and "8. Limitations" for the limitations
regarding CC-Link IE TSN.
2. SYSTEM CONFIGURATION
*1: The SD card is used for the recipe function and document display function.
*2: The battery is used to back up the clock data and the recipe data in the SRAM user area in case of power
failures. (The battery is included as standard in the GOT.)
*3: For more details on the cable, please refer to "GOT2000 Series Connection Manual (Mitsubishi
Products)".
*4: The recommended number of devices is up to 16 in this sample screen.
■Additional Explanation
・
This sample screen can also be used for connecting the GOT to inverters via PLC.
Please refer to "7. User Customize" for details.
・
This sample screen assumes the inverter connection via the channel No.1, network No.1 and station No.1
to 16.
When the inverter is connected via other channels, networks or station numbers, please refer to "7.
User Customize".
Ethernet cable*3
GOT2000
・
GT27**-V (640×480)
・
Interface:
Standard I/F (Ethernet)
・
SD card *1
・
Battery (GT11-50BAT) *2
・
FR-E800 (-E) *4
・
Interface:
Ethernet
Motor
Hub
・
FR-E800 (-E) *4
・
Interface:
Ethernet
Motor
