50/79
BCN-P5999-1305-1c
(3)
Refer to "7.7 C
hanging the Inverter Network No. and Station No.
"
and modify Net No. and Station No. to the
ones set in CH2.
(4) Refer to "7.6 Changing the Communication Settings of the Inverter from CH1 in [Controller Setting]" and
check CH2 of [CH No. for Station No. Switching] which is connected to the inverter in [Station
No.Switching].
(5) Select [Project] and then [Save As Project] to save as another project data.
■How to set CH2 of [Controller Setting] in user's project data.
Add the same setting as [Controller Setting] of the inverter set in (1) of " How to change [Controller Setting] of this
sample screen from CH1 to CH2" to CH2 of [Controller Setting] in user's project data.
■Perform "
6.2.3 Utilize Another Project
"after completing all procedures.
