20/79
BCN-P5999-1305-1c
5.1.9 Machine diag.(load char. meas.) (B-12310)
Outline
This screen is used to display and set the parameters regarding load characteristics of the inverter
connected to the GOT.
Touch [Auto measure] switch to notify the inverter of the start command of load characteristics
measurement.
Description
1.
Sets the standard value for the normal load characteristics.
2.
Displays the image (PNG file) of the overload and normal load ranges for load characteristics
measurement. The graph is being fixed and does not move.
3.
Sets the speed (minimum and maximum frequency) for performing the load characteristics
measurement.
4.
Displays [
Machine Diagnosis Execution
] screen.
5.
Displays the output frequency being measured.
6.
Sets the upper and lower limit warning detection width.
7.
Lights yellow when Load Fault Warning is occurring.
Remarks
・
When the inverter is in the NET operation mode, commands can be input to the inverter by the GOT. When
using this screen, please use the inverter in the NET operation mode.
・
When connecting GOT2000 to the inverter via CC-Link IE TSN, [Auto measure] cannot be performed.
Please refer to "8.1 Limitations of Link Devices" for details.
・
Perform the machine diagnosis after confirming that warnings are not occurring on the inverter side.
1
3
2
5
7
6
4
