Mitsubishi MOTORS Shogun 2007 Owner'S Manual Download Page 57

Page: 57 / 538

Seat and seat belts

2-11

To get in and out of the rear seat

(3-door models, passenger’s seat)

E00401000044

The lever can be used to make getting in and out easier.

Pull up the lever (A) or depress the pedal (B), tilt the seatback

forward. Then slide the entire seat forward. To return the seat,
raise the seatback, then slide the entire seat backward until

there is a “click” in a locked position. Adjust the seat position.

WARNING

●

Do not drive the vehicle with the seatback folded

forward. The seat is not retained with the seatback

in this position, so serious injuries could be suffered
in the event of hard braking or a collision.

CAUTION

●

The reclining mechanism of the seatback is spring

loaded, causing it to return to the vertical position

when the lock lever is operated. When using the
lever, sit close to the seatback or hold it with your

hand to control its return motion.

BK-BK2008E1ENUK.en-uk-Section5.fm Page 11 Wednesday, January 9, 2008 4:28 PM

Summary of Contents for Shogun 2007



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands

Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands