Mitsubishi MOTORS Shogun 2007 Owner'S Manual Download Page 215

Page: 215 / 538

Starting and driving

4-13

Retracting and extending the mirrors using the mirror

retractor switch

With the ignition switch in the “ON” or “ACC” position, push

the mirror retractor switch to retract the mirrors. Push it again
to extend the mirrors to their original positions.

After placing the ignition switch in the “LOCK” position, it is

possible to retract and extend the mirrors using the mirror
retractor switch for about 30 seconds.

NOTE

●

Be careful not to get your hands trapped while a mirror is

moving.

●

If you move a mirror by hand or it moves after hitting a
person or object, you may not be able to return it to its

original position using the mirror retractor switch. If this

happens, push the mirror retractor switch to place the mir-
ror in its retracted position and then push the switch again

to return the mirror to its original position.

●

If the battery voltage is low and you start the engine while
extending the mirrors, the mirrors may stop part-way. If

this happens, push the mirror retractor switch to retract the

mirrors and then push the switch again to extend them.

●

When freezing has occurred and mirrors fail to operate as

intended, please refrain from repeated pushing of the

retractor switch as this action can result in burn-out of the
mirror motor circuits.

CAUTION

●

It is possible to retract and extend the mirrors by

hand. After retracting a mirror using the mirror

retractor switch, however, you should extend it by
using the switch again, not by hand. If you extended

the mirror by hand after retracting it using the

switch, it would not properly lock in position. As a
result, it could move because of the wind or vibra-

tion while you are driving, taking away your rear-

ward visibility.

BK-BK2008E1ENUK.en-uk-Section7.fm Page 13 Wednesday, January 9, 2008 4:36 PM

Summary of Contents for Shogun 2007



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands

Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands