Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Page: 223 / 538

Starting and driving
4-21
4
NOTE
● If the engine is cold, the diesel preheat indication lamp is
on for a longer time.
● When the engine has not been started within about 5 sec-
onds after the diesel preheat indication lamp went out,
return the ignition key to the “LOCK” position. Then, turn
the key to the “ON” position to preheat the engine again.
● When the engine is warm, the diesel preheat indication
lamp does not come on even if the ignition key is placed
in the “ON” position.
Start the engine by turning the ignition key right to the
“START” position.
7. Turn the ignition key to the “START” position without
depressing the accelerator pedal, and release it when the
engine starts.
Fuel injection amount learning process (diesel-
powered vehicles)
E00616000044
To keep exhaust emissions and engine noise low, the engine
very occasionally performs a learning process for the fuel
injection amount.
The engine sounds slightly different from usual while the
learning process is taking place. The change in the engine
sound does not indicate a fault.
BK-BK2008E1ENUK.en-uk-Section7.fm Page 21 Wednesday, January 9, 2008 4:36 PM