Mitsubishi MOTORS Shogun 2007 Owner'S Manual Download Page 91

Page: 91 / 538

Seat and seat belts

2-45

Caution for installing the child restraint on vehi-

cles with a front passenger airbag

The label shown here is attached on vehicles with a front pas-
senger airbag.

Use rearward facing child restraints in the rear seat or turn off

the front passenger’s airbag ON-OFF switch. (Refer to “To turn
an airbag off” on page 2-64.)

WARNING

●

Extreme Hazard!

Do not use a rearward facing child restraint on a

seat protected by an airbag in front of it!

WARNING

●

A REARWARD FACING CHILD RESTRAINT

must NOT be used in the front passenger seat if the

front passenger’s airbag has not been deactivated.
The force of an inflating airbag could kill or cause

serious injuries to the child. A rearward facing child

restraint must only be used in the rear seat.

Front passenger’s airbag ON

BK-BK2008E1ENUK.en-uk-Section5.fm Page 45 Wednesday, January 9, 2008 4:28 PM

Summary of Contents for Shogun 2007



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands

Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands