Mitsubishi MOTORS Shogun 2007 Owner'S Manual Download Page 122

Page: 122 / 538

2-76

Seat and seat belts

SRS servicing

E00407901042

WARNING

●

If any of the following conditions occur, the SRS

and/or seat belt pre-tensioners are not working

properly, and we recommend you to have it
inspected by a MITSUBISHI MOTORS Authorized

Service Point immediately.

• The SRS warning lamp does not illuminate when

you start the vehicle.

• The SRS warning lamp does not go out after sev-

eral seconds.

• The SRS warning lamp illuminates while driving.

WARNING

●

We recommend any maintenance performed on or

near the components of the SRS to be performed by

a MITSUBISHI MOTORS Authorized Service
Point.

Improper work on the SRS components or wiring

could result in inadvertent deployment of the air-
bags, or could render the SRS inoperative; either

situation could result in serious injury.

●

Do not modify your steering wheel, seat belt retrac-
tor or any other SRS components. For example,

replacement of the steering wheel, or modifications

to the front bumper or body structure can adversely
affect SRS performance and lead to possible injury.

●

If your vehicle has received any damage, we recom-

mend you to have the SRS inspected to ensure it is in
proper working order.

●

On vehicles with the side airbags, do not modify

your front seats, centre pillar and centre console.
It can adversely affect SRS performance and lead to

possible injury.

If you found any tear scratch, crack or damage to
the seat fabric near the side airbag, the portion of

the front and rear pillars and roof side rail, you

should have the SRS inspected by a MITSUBISHI
MOTORS Authorized Service Point.

BK-BK2008E1ENUK.en-uk-Section5.fm Page 76 Wednesday, January 9, 2008 4:28 PM

Summary of Contents for Shogun 2007



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands

Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands