Mitsubishi MOTORS Shogun 2007 Owner'S Manual Download Page 221

Page: 221 / 538

Starting and driving

4-19

Starting the engine (petrol-powered vehicles)

E00601701297

Normal conditions

The starting procedure is as follows:

1. Insert the ignition key and fasten the seat belt.

2. Make sure the parking brake is applied.

3. Depress and hold the brake pedal.
4. Make sure the selector lever is in the “P” (PARK) posi-

tion.

5. After turning the ignition key to the “ON” position, make

certain that all warning lamps are functioning properly

before starting the engine.

6. Turn the ignition key to the “START” position without

depressing the accelerator pedal, and release it when the
engine starts.

NOTE

●

A ticking noise may be heard after starting the engine.

This is not an abnormal condition. The noise will disap-
pear after a short time of engine running.

If the ticking noise continues after the engine is warmed

up, we recommend you to have your vehicle checked.

BK-BK2008E1ENUK.en-uk-Section7.fm Page 19 Wednesday, January 9, 2008 4:36 PM

Summary of Contents for Shogun 2007



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands

Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands