Mitsubishi MOTORS Shogun 2007 Owner'S Manual Download Page 365

Page: 365 / 538

For pleasant driving

5-69

ID3 tag information

The autochanger can display ID3 tag information for files that
have been recorded with ID3 tag information.

1. Press the DISP button (3) for 2 seconds or longer to

switch to the ID3 tag information. “TAG” indicator will
appear on the display.

2. Then press the DISP button for less than 1 second repeat-

edly to make selections in the following sequence: album
name

→

track name

→

artist name

→

normal display

mode.

NOTE

●

To return from ID3 tag information to the folder name,
press the DISP button (3) again for 2 seconds or longer.

●

When there is no title information to be displayed, the dis-

play shows “NO TITLE”.

●

The display can show up to 16 characters. If a folder

name, track name, or item of ID3 tag information has

more than 16 characters, press the PAGE button (10) to
view the next 16 characters.

●

Folder names and track names can each be displayed up to

a length of 32 characters. Items of ID3 tag information
can each be displayed up to a length of 30 characters.

●

Characters that the autochanger cannot display are shown

as “ ”.

To listen to a disc in the rear-seat display (vehicle

with rear-seat display)

E00709700040

It is possible to listen to the audio from the rear-seat display

using the vehicle’s speakers.

Press the CD button (4) to select the rear-seat display mode.

The word “REAR” will appear at the top-left of the display.
Each push of the CD button (4) changes the mode to the next

one in the following sequence: CD changer

→

rear-seat display

mode

→

CD changer.

The following operation of the rear-seat display is possible

from the audio system.

To make your desired selection, use the TRACK button (11) or

the FOLDER button (12 or 13) on the audio system.

NOTE

●

For more details about the rear-seat display, refer to the

separate owner’s manual.

Source

Operation

Track selection

MP3/WMA

Folder/Track selection

Video CD

Track/Scene selection

DVD video

Title/Chapter selection

DVD audio

Group/Track selection

BK-BK2008E1ENUK.en-uk-Section8.fm Page 69 Wednesday, January 9, 2008 4:41 PM

Summary of Contents for Shogun 2007



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands

Mitsubishi MOTORS Shogun 2007, Owner'S Manual

Search results

Summary of Contents for Shogun 2007

Reviews:

Related manuals for Shogun 2007

Brands by name

Popular brands