Mitsubishi Electric QD62, User Manual

Page: 52 / 128

4 - 15 4 - 15
MELSEC-Q
4 SETUP AND PROCEDURE BEFORE STARTING THE OPERATION
4) Clicking Detailed setting displays the "Intelligent function
module detailed setting" dialog box.
Refer to the following and complete the setting.
Setting for the QD62 (E/D) error detection Setting for a CPU stop error
Item Description
Error time output mode Sets to either clear or hold the module output status when a
programmable controller CPU stop error occurs.
Clear:
Turns off all of the coincidence signal external
outputs when a programmable controller CPU
stop error occurs. (Default)
Hold: Holds the same on or off status before the CPU is
stopped for the coincidence signal external
outputs when a programmable controller CPU
stop error occurs.
H/W error time PLC
operating mode Sets to either stop or continue the programmable controller
CPU operation when an intelligent function module error
(SP.UNIT DOWN) is detected.
Stop:
Stops the programmable controller CPU operation
when the QD62 (E/D) error is detected. (Default)
Continue: Continues the programs for modules other than
those in which an error was detected when the
QD62 (E/D) error is detected.
The QD62 (E/D) error (SP.UNIT DOWN) is detected when
the Unit READY flag is not in the READY status due to a
module hardware failure.