Mitsubishi Electric QD62, User Manual

Page: 14 / 128

1 - 1 1 - 1
MELSEC-Q
1 OVERVIEW
1 OVERVIEW
This User's Manual describes the specifications, handling and programming method
for the QD62, QD62E and QD62D high-speed counter modules (QD62 (E/D)) used
together with the MELSEC-Q series CPUs.
The QD62(E/D) modules are available with the following I/O types, maximum counting
speeds and number of channels.
Item QD62 QD62E QD62D
I/O type
DC input sinking
output
DC input sourcing
output
Differential input
sinking output
Maximum counting speed 200 kPPS 500 kPPS
Number of channels 2 channels
The QD62(E/D) modules have the following input methods for 1 phase/2 phase pulse input:
• Phase 1 pulse input multiple of 1 • Phase 1 pulse input multiple of 2 • CW/CCW
• Phase 2 pulse input multiple of 1 • Phase 2 pulse input multiple of 2
• Phase 2 pulse input multiple of 4
See Section 5.1 for details on the input methods.
An overview of QD62 (E/D) operation is shown in the figure below.
Pulse generator
Encoder
Controller
Pulse
External
control signal
Preset counter
function selection
2)
1)
3) Coincidence signal output
(2 points)
CH1
Pulse generator
Encoder
Controller
Pulse
External
control signal
Preset counter
function selection
4)
3)
3) Coincidence signal output
(2 points)
CH2
QD62(E/D)
QCPU (Q mode)
Programmable
controller CPU
Buffer memory
read/write
4) I/O signal
1) Counts the pulses to be input to the QD62 (E/D).
2) Preset or counter function can be selected with an external control signal.
3) The present count value and the coincidence output point setting value can be
compared to output a coincidence signal.
4) Using the sequence program, the I/O signal and buffer memory status of the
QD62 (E/D) can be verified.
Also, count start/stop, preset, and counter function can be selected.
1