124
12-3. MXZ-4C80VA MXZ-4C80VA2 MXZ-5C100VA MXZ-5C100VA2
NOTE
: Turn OFF power supply before disassembly.
OPERATING PROCEDURE
PHOTOS
1. Removing the panels
(1) Remove the screws of the service panel, and remove the
service panel.
(2) Remove the screws of the top panel, and remove the top
panel.
(3) Remove the screws of the front panel, and remove the front
panel.
(4) Remove the screws of the rear panel, and remove the rear
panel.
Photo 1
Screws of
the service
panel
Screws of the front panel
Screws of the top panel
Screws of
the side panel
Screws of the
service panel
Screws of the top panel
Photo 2
Screws of
the rear panel
Photo 3
Screws
of the
electrical
parts
2. Removing the electronic control P.C. board, power
board and the noise filter P.C. board
(1) Remove the screws of the top panel and the service panel
(Photo 1 and 2).
(2) Remove the top panel and the service panel (Photo 1 and 2).
(3) Disconnect all connectors and lead wires on the electronic
control P.C. board.
(4) Remove the electronic control P.C. board.
(5) Remove the screws fixing the power board.
(6) Disconnect all connectors and lead wires on the power
board.
(7) Pull up the power P.C. board and remove it upward.
(8) Disconnect all connectors and lead wires on the noise filter
P.C. board.
(9) Remove the noise filter P.C. board.
OBH584G
Summary of Contents for MXZ-2C30VA
