3. INSTALLATION AND UNINSTALLATION
3
−
5
From preceding page
<When not changing>
<When changing>
12) When changing the installation destination drive
and directory, choose the new drive and directory
and click [OK].
When not changing the installation destination
directory, the directory selection dialog box does
not appear.
<For other than SNETP>
<For SNETP>
13) For SNETP, choose the setup method.
Check the setup method and click [Next >].
•
"Typical" indicates that only the communication
software necessary to use SW3RN-GSV[ ][
]P/DOSCP/LADDERP is installed.
•
"Custom" indicates that you can choose the
software to be installed.
Choose Custom when designing the user
application using the SSCNET communication
API.
For custom
For Typical
14) When you selected "Custom" as the setup method,
choose the components to be installed.
•
When using the SSCNET communication API to
design the user application and make
communication
Place "
" in the "SSCNET communication
library" checkbox and click [Next >].
To next page