3. INSTALLATION AND UNINSTALLATION
3
−
32
3.7 Updating Instructions and Procedures
This section describes the instructions and operating procedures for updating
SW3RNC-GSVE to Ver. 00H.
The versions of the SW3RNC-GSVE Ver. 00H packages are indicated in Table
3.4.
Table 3.4 Package Definitions of SW3RNC-GSVE Ver. 00H
Type
Version
Product Name
SW3RN-GSV13P
00E
Transfer/assembly software
SW3RN-GSV22P
00E
Automatic machine software
SW3RN-GSV43P
00D
Machine tool peripheral software
SW3RN-GSV51P
00B
Special-purpose robot software
SW3RN-CAMP
00E
Cam data creation software
SW3RN-LADDERP
00F
Ladder editing software (For Office 97)
SW20RN-LADDERP
00B
Ladder editing software (For Office 2000)
SW3RN-DOCPRNP
00H
Document printing software (For Office 97)
SW20RN-DOCPRNP
00D
Document printing software (For Office 2000)
SW3RN-DOSCP
00E
Digital oscilloscope software
SW3RN-SNETP
00J
SSCNET communication system software
When updating, update one set of the above packages.
(1) Updating performed when only SW3RNC-GSVE has been installed
•
When performing updating in the personal computer where the SW3RNC-
GSVE Ver. 00F or earlier (the one in Table 3.4 or earlier) version has been
installed.
START
Uninstall all of the following packages.
SW3RN-GSV13P
SW3RN-GSV22P
SW3RN-GSV43P
SW3RN-GSV51P
SW3RN-CAMP
SW3RN-LADDERP(or SW20RN-LADDERP)
SW3RN-DOCPRNP(or SW20RN-DOCPRNP)
SW3RN-DOSCP
SW3RN-SNETP
Set up the SSCNET driver of SNETP.
(Refer to Chapter 4)
END
Install all of the following packages.
SW3RN-GSV13P
SW3RN-GSV22P
SW3RN-GSV43P
SW3RN-GSV51P
SW3RN-CAMP
SW3RN-LADDERP(or SW20RN-LADDERP)
SW3RN-DOCPRNP(or SW20RN-DOCPRNP)
SW3RN-DOSCP
SW3RN-SNETP
