4. SSCNET COMMUNICATION DRIVERS
4
−
27
From preceding page
5) Choose "Disabled" from the Startup options and click
[OK].
6) The "Devices" screen reappears.
Perform the operations in steps 4) and 5) also for the
other devices.
•
SSCNET (CH. 0: Transient)
•
SSCNET (CH. 0: Cyclic)
•
SSCNET (CH. 1: Transient)*1
•
SSCNET (CH. 1: Cyclic)*1
*1: For the interface card, CH. 1 does not appear.
*2: When you are using two or more interface
boards, transient and cyclic communication
devices for CH. 2 and later are displayed.
When there are four boards fitted, devices for
up to CH. 8 appear.
7) Click [Close].
8) Close the Control Panel and choose [Shut Down] in
the Start menu to reboot the personal computer.
The SSCNET communication driver stops after
rebooting.
9) Before removing the interface card or interface
board, choose [Shut Down] in the Start menu to
power off the personal computer.
