7 OPERATION EXAMPLES
7.2 Communication Examples of the RD77GF
83
7
Setting in the local station
Connect the engineering tool to the CPU module on the local station and set parameters. Set the station No.1 and 2 to the
same setting.
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. (
Page 79 Setting in the master station)
2.
Set the master/local module in the following item.
Navigation window
"Parameter"
"Module Information"
Right-click
[Add New Module]
3.
Add a module label of the master/local module. The addition method of the module label is the same as that of the
master station. (
Page 79 Setting in the master station)
4.
Set the contents of "Required Settings" in the following item. For station No.2, set "Station No." to "2".
Navigation window
"Parameter"
"Module Information"
"RJ71GF11-T2"
"Module Parameter"
"Required
Settings"
Master station (station No.0)
Local station (station No.1)
Local station (station No.2)
Setting
Setting
