6 WIRING
6.1 Wiring of the RD77MS
57
6
■
Wiring process of SSCNET
cable
Put the SSCNET cable in the duct or fix the cable at the closest part to the Simple Motion module with bundle material in order
to prevent SSCNET cable from putting its own weight on SSCNET connector. Leave the following space for wiring.
• Putting in the duct
*1 For wiring duct with 50 mm (1.97 inch) or less height. For other cases, 40 mm (1.58 inch) or more.
*2 20 mm (0.79 inch) or more when the adjacent module is not removed and the extension cable is connected.
• Bundle fixing
Optical cord should be given loose slack to avoid from becoming smaller than the minimum bend radius, and it should not be
twisted. When laying cable, fix and hold it in position with using cushioning such as sponge or rubber which does not contain
plasticizing material.
RD77MS4
ERR
RUN
AX
3
4
2
1
AX
Top of panel or wiring duct
Base unit
30 mm
(1.18 inch)
or more
*1
70 mm
(2.76 inch)
or more
119 mm
(4.69 inch)
80 mm
(3.15 inch)
or more
Panel
Door
5 mm (0.20 inch)
or more
5 mm (0.20 inch)
or more
*2
RD77MS
Bundle material
Recommended product
NK clamp SP type (NIX, INC.)
Cable
Optical cord
Loose slack
Base unit
RD77MS
Panel
