Mitsubishi Electric MELSEC iQ-R C R12CCPU-V, User Manual

Page: 78 / 262

76
5 ACCESS FUNCTION USING NETWORK MODULE
5.1 Data Communication via Network
5
ACCESS FUNCTION USING NETWORK
MODULE
C Controller modules can perform data communication with a device connected to a network via a network module.
In a multiple CPU system configuration, the access via a network module which is controlled by another CPU
is not available.
Available network modules
Network modules that can be controlled by C Controller module are as follows:
• CC-Link IE Controller Network module
• CC-Link IE Field Network module
• MELSECNET/H network module
• CC-Link module
For module names, refer to the following manual.

MELSEC iQ-R Module Configuration Manual
Network parameter
To use a network module, setting of "Module Parameter" of the particular Network module is required. To perform this settings,
refer to the user's manual of the respective network modules.
5.1
Data Communication via Network
This section shows how to perform data communication using C Controller modules on each network.
Transmission type Description Communication method
Cyclic transmission Performs data communication
periodically between stations on a
network using link devices. Use link devices of the network module on the own station controlled by a C
Controller module.
Transient transmission Performs data communication with
another station when a
communication request is issued.
Communication with different network
can also be performed. Use devices or buffer memory of a network module of another station via a
network.
Access source Access target
Access using Network module