127
Speci
fi
cations
ENGLISH
Rated Power Supply .................100 to 240 V AC, 50/60 Hz
Rated Input ...............................0.9- 0.4 A (100-240 V)
Colour System ..........................PAL-type colour system.
Operating Temperature .............41 °F-104 °F (5 °C to 40 °C)
Relative Humidity .....................Max. 80 (%)
Altitude .....................................Max. 2000 (m)
Dimensions ...............................425 (Width) x 375 (Depth) x 133 (Height) (mm)
Weight .....................................9.8 kg (when 1 HDD is attached), 10.5 kg (when 2 HDDs are attached)
Recording System ....................Digital recording system
Sampling
............................13.5
MHz
Data
Compression
.............JPEG2000
Compression Unit ...............Frame, Field
Recording Resolution ...............720 x 576, 720 X 288
Recording Device .....................Hard disk drive (HDD)
Video Input ...............................16 Input BNC-Connectors: 1.0 V(p-p), 75 ohms.
Monitor Output ..........................S-Connector: Y-Signal:
1.0 V(p-p), 75 ohms.
C-Signal:
0.3 V(p-p), 75 ohms.
2 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
RCA-jack:
1.0 V(p-p), 75 ohms.
Throughout Output ..................16 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
Audio Input ...............................RCA-Jack:
308 mV(rms), 50 k ohms.
Audio Output ............................RCA-Jack:
308 mV(rms), 1 k ohms.
Clock .....................................±20 seconds/month (when power is supplied, 25 °C)
Timer Program ..........................8 programs-Daily start and stop time for one week x 2 set
Memory Backup .......................Lasts for more than 1 month (when fully charged)
Connectors
External storage terminal ...Serial bus (1-4) (For connecting the recommended optional items only)
Control
terminals
Clock adjust Input ........Active:
When terminals are short-circuited or “Low” Level voltage is applied.
Non
active: Open.
Clock adjust Output ......Active:
“Low” Level Max. Drive current 30 mA DC.
Non active:
Open.
Max. Voltage 24 V DC.
(Clock adjust Output is throughout of Clock adjust Input)
Recording start Input ....Active:
When terminals are short-circuited or “Low” Level voltage is applied.
Non
active: Open.
Recording stop Input ....Active:
When terminals are short-circuited or “Low” Level voltage is applied.
Non
active: Open.
Emergency Input ..........Active:
When terminals are short-circuited or “Low” Level voltage is applied.
Non
active: Open.
Mode out (1-4) .............Active:
“Low” Level Max. Drive current 30 mA DC.
Non active:
Open.
Max. Voltage 24 V DC.
Call out +/– ...................Active:
Short
Max. Drive current 7 mA DC.
(Photo coupler output) Non active:
Open.
Max. Voltage 24 V DC.
Ground
terminal
DC 12 V Output ............Max. 350 mA DC (when Main switch and power button is turned on)
Alarm Input (1-16) ........Active:
When terminals are short-circuited or “Low” Level voltage is applied.
Non
active: Open.
Alarm Output (1-16) .....Active:
“Low” Level Max. Drive current 30 mA DC.
Non active:
Open.
Max. Voltage 24 V DC.
PTZ terminal ................RS-232C terminal
RS-422
terminal
Serial
port
.....................RS-232C D-SUB 9 pin
RS-485
port
..................RS-485 Input/Output, RJ-11
Communication
LAN ..............................Connector form: RJ-45 Physical interface: 10BASE-T/100BASE-TX
DVD-R/RW, CD-R/RW recording format ...........Original format
Accessories ..............................AC power cord (For U.K/for the Continent)
2
CD
1
Cable clamping band
2
Installer’s manual (this manual)
1
User’s
manual
1
Weight and dimensions shown are approximate.
Design and speci
fi
cations are subject to change without notice.
This unit complies with the European EMC test standard EN50130-4.
Speci
fi
cations