Beginning
15
ENGLISH
Loading/Ejecting a DVD or CD
Before using a disc, read the cautionary notes described
in the manual included with the disc.
step
1.
Press the OPEN/CLOSE button.
• The disc loading slot opens.
[When loading the disc:]
step
2
-1
.
Place the disc onto the tray.
• Make sure that the disc is inserted properly with
the label side up.
[When ejecting the disc:]
step
2
-2
.
Eject the disc from the tray.
step
3.
Press the OPEN/CLOSE button again.
• The disc loading slot closes.
Do not eject the disc while copying/restoring, saving/load-
ing menus, or immediately after inserting the disc. The
disc or the contained data may be damaged.
Use the disc which we recommend. When a disc other
than the recommended is used, the data may not be read
or written correctly. Consult your dealer for recommended
usable discs.
When using DVD-RW or CD-RW disc, initialize the disc
by <Data Clear> (
page 79) before using.
Although you can copy the data on DVD/CD with this unit
and playback that data on the personal computer using
the special application software, not all the personal com-
puters or DVD/CD drives are ensured for proper playback
of such data.
Before using the DVD drive, check whether that the drive
supports the medium to be used. It is recommended to
use the DVD-Multi drive when you playback the data on
the personal computer.
33. Operation buttons
STOP button
Stops playback.
PAUSE/JUMP TO END button
Switches the playback to still frame playback when
pressing this button during playback. Resumes playback
when pressing the button again. The button lights up
during still frame playback.
When pressed during shuttle playback, the set playback
speed is maintained even when letting go of the SHUT-
TLE ring. (Shuttle hold)
When pressed during the unit is in stop mode of play-
back, the frame still picture around the end point of the
latest recording appears. (Jump to end)
REV. PLAY (REVERSE PLAY) button
Starts reverse playback. The button lights up during re-
verse playback.
PLAY button
Starts playback. The button lights up during playback.
SPEED (+ and –) button
Switches the playback interval speed during normal or
reverse playback.
