Mitsubishi Electric Apricot XEN pentium, Owner'S Handbook Manual

Page: 56 / 147

XEN OWNER'S HANDBOOK 4/1
SETUP
Chapter 4
4 SETUP
Introduction
Your computer’s motherboard is fitted with a small area of
memory which is used to store information about the
configuration of the computer. The computer’s configuration
is modified using a SETUP utility provided in Read Only
Memory (ROM) on the motherboard.
A rechargeable battery on the motherboard maintains the
configuration memory when the computer is switched off.
Invoking SETUP
Each time the computer is switched on, or rebooted, it runs
through a self test procedure. During this period the SETUP
utility can be invoked by pressing the
F
1 key.
An icon in the form of a box, a little over one inch square,
appears in the top right corner of the screen during the period
that SETUP can be invoked. An illustration of the icon is shown
below.
~~~~ ~~~
~~~~ ~~~
~~~~ ~~~
There may be a delay of a few seconds, while the self test
procedure is completed, before the SETUP screen appears.