Mitsubishi Electric Apricot XEN pentium, Owner'S Handbook Manual

Page: 24 / 147

2/4 XEN OWNER'S HANDBOOK
Getting started with your computer
Chapter 2
Connecting the components
Having assured yourself that the voltage settings and the AC
power cords of the computer, the monitor and any other
peripherals are correct:
1. If your AC power outlets have switches, set them
to their Off positions.
2. Ensure that the system unit, the monitor, and any
peripherals are turned off.
3. Connect signal cables and power cords (in that
order) to their respective ports and inlets on the
system unit, the monitor, and any peripherals. Make
sure the cables are connected securely.
When you plug the keyboard cable into the rear of
the system, be careful not to plug it into the mouse
port by mistake.
4. Connect the system unit and peripheral power
cords to nearby, grounded AC power outlets.
5. If your AC power outlets have switches, set them
to their On positions.
Your computer is now ready to use. The rest of this chapter
tells you how to turn your computer on and off, and how
to configure it using the built-in SETUP utility.
Turning on and booting the computer
Turning the power on
To turn on the computer, simply press the
POWER
button.
The green indicator on the
POWER
button lights to show that
the system unit is powered. Remember that the monitor
has its own power control; see the monitor’s
User’s Guide
for details.
Always make sure that the system is turned on before
turning on any attached peripherals.