Mitsubishi Electric Apricot XEN pentium, Owner'S Handbook Manual

Page: 42 / 147

3/10 XEN OWNER'S HANDBOOK
Operating your computer
Chapter 3
4. Set the disc, with its label upward, in the caddy. Handle
the disc only by its edge.
5. Close the lid of the caddy firmly.
6. Insert the caddy into the slot of the drive with the
disc’s label facing up and the arrow on the caddy
pointing towards the drive (that is, shutter end
foremost). Push the caddy in until it is completely
swallowed up by the drive.
The drive begins reading the disc’s table of contents. The
drive’s activity indicator lights while the table of contents is
being read. When the activity indicator goes out, the drive is
ready for use.
If the activity indicator remains on, this may indicate that the
disc is not properly positioned within the caddy. In this case,
press the
EJECT
button to remove the caddy and try again. If
the problem persists, consult your supplier or an authorized
maintainer.
Note too that the software controlling the CD-ROM drive
may be able to prevent the insertion of a disc.
Removing a compact disc
1. Ensure that the computer is turned on (otherwise the
EJECT
button will not work) and that the drive is not
currently in use (the drive’s activity indicator must be
unlit).
2. Press the
EJECT
button. The drive mechanism
disengages and the caddy is partially ejected from the
drive.
The
EJECT
button can be disabled by the software
controlling the CD-ROM drive. In this case pressing
the
EJECT
button will have no effect.