26MT-SP Multi-Tool
6
Original Instructions Version June 16
Safety Precautions
Introduction
Read this Owner/Operator Manual carefully. Be sure you understand how to operate this Multi-
Tool properly before you use it. Failure to do so could result in serious injury.
Keep this manual handy so that you may refer to it later whenever any questions arise. Also note
that you are able to contact the dealer from whom you purchased the product for assistance.
Always include this manual when selling, lending, or otherwise transferring the ownership of this
product.
This product has been designed to be used as a Multi-Tool power tool as described previously and
it should never be used for any other purpose; doing so could result in unforeseen accidents and
injuries occurring. Only approved Mitox accessories should be used with this product.
This Multi-Tool is equipped with extremely sharp blades, always wear sturdy gloves when handling
the blades and fit the safety guards when not in use.
When using this Multi-Tool for the first time, take it to a wide, clear, open space, start the engine,
and practice handling the Multi-Tool until you are sure that you will be able to handle it properly in
actual operation.
You should never use this Multi-Tool when under the influence of alcohol, suffering from
exhaustion or lack of sleep, suffering from drowsiness as a result of having taken medicine, or at
any other time when your judgement might be impaired or that you might not be able to operate
the Multi-Tool properly and in a safe manner.
Never allow children or anyone unable to fully understand the directions given in this manual to
use this Multi-Tool.
When planning your work schedule, allow plenty of time to perform the work and allow plenty
of time for rest. Limit the amount of time you continuously use the Multi-Tool to 30~40 minutes
per session and take 10~20 minutes of rest between work sessions. Also, try to keep the total
amount of work performed in a single day to 2 hours.
Never run the engine indoors as the exhaust gases contain harmful carbon monoxide.
Summary of Contents for 26MT-SP
Page 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Page 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Page 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Page 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...