![background image](http://html1.mh-extra.com/html/mitox/26mt-sp/26mt-sp_operators-manual_1807939010.webp)
26MT-SP Multi-Tool
10
Original Instructions Version June 16
Avoid Noise Problems
Check and follow the local regulations for sound levels and hours of operation for garden
machinery.
In general, operate Multi-Tools between 8 am and 5 pm on week days and 9 am to 5 pm at
weekends.
Avoid using the Multi-Tool late at night and/or early in the morning.
Safety when using the Multi-Tool
When using the Multi-Tool, grip the handles firmly with both hands, place your feet slightly apart
so your weight is distributed evenly across both legs, and always maintain a steady even posture
while working. Do not use on ladders or if the ground surface is slippery or uneven. Never
attempt to cut directly overhead or with one hand.
• Maintain full engine speed when cutting.
• Never allow other persons to come within the work area as doing so
might expose them to danger.
• Keep work area clear of all persons, particularly small children and pets.
Injury may result from flying debris.
• If grass or other objects get caught in the Multi-Tool during operation,
always stop the engine before removing the object.
• Never touch the spark plug or plug HT cable while the engine is in
operation, doing so may result in an electrical shock.
• Never touch the exhaust, spark plug, or any metallic parts while the
engine is in operation or immediately after shutting down the engine.
These parts reach high temperatures during operation and doing so
could result in serious burns.
• When you finish cutting in one location and wish to continue work in another area, stop the
engine and fit the blade safety guards.
• Always remove fuel from the fuel tank before transportation to prevent fuel spillage.
• Never leave the Multi-Tool exposed to direct sunlight as this can heat the fuel tank and may
cause a discharge of fuel, and flood the engine.
• Be careful not to hit the cutting head against stones or the ground.
Summary of Contents for 26MT-SP
Page 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Page 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Page 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Page 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...