26MT-SP Multi-Tool
28
Original Instructions Version June 16
Installing the Attachments to the Power Unit
(or Optional Extension Shaft)
•
Pull out the locking pin (1) and twist (2) to lock in the outer position (3).
•
Loosen the clamp by turning the handle (4).
•
Insert the attachment shaft, lining up the locking hole with the locking pin .
•
Twist the locking pin (5) to release it from the outer position. You may need to twist the
attachment shaft to ensure that the locking pin engages with the locking hole (6).
•
Tighten the clamp by turning the handle (7).
Clamp
A
ttachment
shaft
Locking
hole
Locking pin
1
2
3
4
5
6
7
Summary of Contents for 26MT-SP
Page 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Page 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Page 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Page 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...
