![background image](http://html1.mh-extra.com/html/mitox/26mt-sp/26mt-sp_operators-manual_1807939029.webp)
26MT-SP Multi-Tool
29
Original Instructions Version June 16
Operation
Keep clear of the cutter head as it may start moving when the engine starts.
Starting the Engine
CAUTION
do not pull the starter cord all the way out and do not let go of the starter handle when
the cord is extended, this can damage the starter mechanism.
Cold Engine Starting
Rest the unit on a flat, firm surface. Keep the cutting head off the ground and clear of surrounding
objects as it may start moving when starting the engine. Set the throttle to “fast idle” as follows :
(1) Depress and hold the safety lock lever (Fig 3-f). (2) Squeeze and hold the throttle lever (Fig
3-g). (3) Depress the throttle lock button (Fig 3 -e). (4) While holding down the throttle lock button,
release the throttle lever and safety lock lever. (5) Release the throttle lock button.
Fig 4 - While holding the unit, pull out the
starter rope firmly until the engine fires
(indicated by a ‘cough’ from the engine).
Fig 2 - Move the choke lever (c) to the
closed ( ) position.
Fig 1 - Push the air purge bulb (a) until
fuel is visible in the clear return fuel
line (b)
(a)
(b)
(c)
Fig 3 - Set the ignition switch (d) to the
START (I) position. (e) Is the throttle lock
button.
(d)
(e)
(f)
(g)
Summary of Contents for 26MT-SP
Page 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Page 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Page 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Page 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...