![background image](http://html1.mh-extra.com/html/mitox/26mt-sp/26mt-sp_operators-manual_1807939025.webp)
26MT-SP Multi-Tool
25
Original Instructions Version June 16
Adjust the Pump as follows:
• Stop the engine and make sure the stop switch is in the OFF position.
• Place the unit on its side with the oil reservoir (1) up.
• The oil flow adjusting screw must be pressed in slightly in order to turn. Failure to do so could
damage the pump and screw.
• With a screwdriver, push in on the oil flow rate adjusting screw and turn in the desired direction.
• There are 3 incremental settings: Clockwise-decrease lubrication, Counter clockwise-increase
lubrication.
• When storing the pole pruner attachment, to prevent oil from seeping through the pump, either
1) Empty the oil tank.
2) Lay the pole pruner attachment with the tank facing down.
(1.)
Summary of Contents for 26MT-SP
Page 38: ...26MT SP Multi Tool 38 Original Instructions Version June 16 Parts Diagram Engine...
Page 42: ...26MT SP Multi Tool 42 Original Instructions Version June 16 Parts Diagram Body...
Page 46: ...26MT SP Multi Tool 46 Original Instructions Version June 16 Parts Diagram Hedgetrimmer...
Page 49: ...26MT SP Multi Tool 49 Original Instructions Version June 16 Parts Diagram Pole Pruner...