manualshive.com logo in svg

Mitel DBC 223, Directions For Use Manual, Page: 94 / 121

Share
Download
Mitel DBC 223 Directions For Use Manual Download Page 94

3/1553-ANF 901 54 Uen F5 2018-12-03

94

O

THER

 

FEATURES

9.14.1 

MULTIPLE REPRESENTED DIRECTORY NUMBER WITHOUT 

DIAL-BY-FUNCTION KEY

9.14.1.1 

To receive a call

An incoming call to a directory number that is multiple represented is indicated (with 

lamp flashes, calling party information and/or ringing signal) in all telephones where the 

number is represented.
If the calling party information is shown or not, is set by the system administrator.

9.14.1.2 

To answer a call

The incoming call can be answered by any telephone (where the number is multiple 

represented as a key) by lifting the handset and pressing that key. After the answer, 

that telephone will be in speech with the calling party and all the other telephones 

having the number multiple represented will indicate that the number is busy by turning 

the corresponding lamp ON. During this time the represented number will be out of use 

(on the triple access line the Line 2-key and Inquiry-key can be used for making calls 

but not for receiving calls) until the call is disconnected by the answering party.

9.14.1.3 

To make a call

Any telephone that has a key that represents another number can use that key to 

initiate a call by pressing the key. All other telephones that have that number multiple 

represented will indicate that the number is busy by turning the corresponding lamp 

ON. During this time the represented number will be out of use (on the triple access 

line the Line 2-key and Inquiry-key can be used for making calls but not for receiving 

calls) until the call is disconnected by the answering party.

9.14.1.4 

Parking

5.9 Parking on page 59 .

9.14.1.5 

Using features from a multiple represented directory number

Features have the same procedure as for triple access line if nothing else is stated with 

the exception that the multiple represented line-key has to be pressed after lifting the 

handset. All features activated/canceled from the multiple represented line-key are 

related to your own directory number except for the diversion feature.

9.14.2 

MULTIPLE REPRESENTED DIRECTORY NUMBER WITH 

DIAL-BY-FUNCTION KEY, MNS

9.14.2.1 

To receive a call

An incoming call to a directory number that is multiple represented is indicated (with 

lamp flashes, calling party information and/or ringing signal) in all telephones where the 

number is represented.
If the calling party information is shown or not, is set by the system administrator.

Summary of Contents for DBC 223


























































































































Reviews:

No comments