manualshive.com logo in svg

Mitel DBC 223, Directions For Use Manual, Page: 18 / 121

Share
Download
Mitel DBC 223 Directions For Use Manual Download Page 18

3/1553-ANF 901 54 Uen F5 2018-12-03

18

T

ELEPHONE

 

INSTRUMENT

 DBC 223

2.8 

LOUDSPEAKER FUNCTION

2.8.1 

WARNING TONE

Note:  

Not applicable.

2.8.2 

HANDSFREE

This function offers you the possibility to dial and monitor the progress of a call as well 

as having a conversation without using the handset.

2.8.2.1 

To make calls

•

Dial the wanted number.

•

Press the Clear-key to finish your call.

2.8.2.2 

To receive calls

•

Press the Line 1 or the Line 2-key or any other key that indicates a call.

2.8.2.3 

To change from handsfree to handset

•

Lift the handset.

2.8.2.4 

To change from handset to handsfree

•

Press the Speaker-key.

•

Replace the handset.

2.8.2.5 

To change from handsfree to headset

•

Press the Headset-key.

2.8.2.6 

To change from headset to handsfree

•

Press the Speaker-key.

•

Press the Headset-key.

2.8.2.7 

To clear the call

•

Press the Clear-key.

2.8.3 

CALL PROGRESS MONITORING

Note:  

Not applicable.

Summary of Contents for DBC 223


























































































































Reviews:

No comments