Mitel DBC 223 Directions For Use Manual Download Page 88 | Manualshive

Page: 88 / 121

Mitel DBC 223 Directions For Use Manual Download Page 88

3/1553-ANF 901 54 Uen F5 2018-12-03

88

O

THER

FEATURES

9.9

GENERAL CANCELLATION

The following procedure is used to request general cancellation:
•

Lift the handset (dial tone).

•

Dial #001#.

•

Replace the handset.

The following initiated features are simultaneously canceled by the feature general

cancellation:
•

Call back (all call back missions are canceled).

•

Diversion/follow-me/external follow-me.

•

Manual Message Waiting/Message Diversion.

•

Do not disturb.

•

Flexible night service.

Note:

For an additional line, the call back missions from the triple access line are

canceled as well.

9.10

HOT-LINE (NON-DIALED CONNECTION)

9.10.1

DIRECT HOT-LINE

An extension number (triple access and additional number) can be defined as a direct

hot-line. When the handset on the telephone is lifted or a line-key is pressed a call is

automatically generated to a predefined extension position or external subscriber. The

only call that can be placed from this type of line is the direct hot-line call.

9.10.2

DELAYED HOT-LINE

An extension number (triple access and additional number) can be defined as a

delayed hot-line. When the handset on the telephone is lifted or a line-key is pressed

a timer is started, and if no digit is dialed before the timer expires, the call is automati

-

cally generated to a predefined extension position or external subscriber. Otherwise

the call is treated as a normal call.

9.11

INTERCEPTION SERVICE

9.11.1

GENERAL

By using the interception service facility you can obtain effective interception (diver

-

sion) of incoming calls when you are unable to answer your telephone.
The task of an interception computer is, quickly and simply, to store and display infor

-

mation about those people (extension users), that is, employees of a company, who

use the PBX. Messages to and from users can be registered simply in the interception

computer. This takes place at special answer positions, message diversion positions.
A typical answer position is an extension or operator assistant connected to the inter

-

ception computer. You initiate message diversion for your extension, that is, request

«
...
86
87
88
89
90
...
»

Summary of Contents for DBC 223


























































































































Reviews:

No comments