Mitel 6863i User Manual Download Page 124

Page: 124 / 162

Mitel 6863i SIP Phone Release 4.0.0 SP1 User Guide

122

USING CFWD VIA THE IP PHONE UI

Once CFWD is enabled on your phone, you can access and change the configuration using

the IP phone UI or the Mitel Web UI. You can access the CFWD menus by pressing a

pre-configured

CFWD

key, or by selecting

Options > Call Forward

from the IP phone UI.

CFWD in Account Mode

Use the

and

navigation keys to scroll through each account.

In the above example, account 1 has CFWD All enabled and account 2 has CFWD Busy

enabled.

Press the programmed

Call Forward

key. The Call Forward Mode screen displays. Use

the

and

navigation keys to scroll through each state type.

In the above example, CFWD All is enabled as indicated by a check mark (



), CFWD

Busy is enabled but no call forward phone number configured as indicated by a

, and

CFWD No Answer is disabled, as indicated by an

Select a state for the account(s) in focus using the

and

navigation keys.

You can enable/disable any or all of the following states for an account:

Notes:

If there is no

CFWD

key configured on the phone or it is removed, you can still

enable CFWD via the IP phone UI at the path

Options > Call Forward

If there is only one account configured on the phone, then the mode setting is

ignored and the phone behaves as if the mode was set to Phone.

Using the Mitel Web UI, if you change the CFWD mode to Phone, all accounts

synchronize to the current setting of Account 1.

IP PHONE UI

John Smith

CFWD All

Tue Aug 20 2:55pm

J. Smith

CFWD Busy

Tue Aug 20 2:55pm

Cfwd Mode
1. All
Done Change

Cfwd Mode
2. Busy !
Done Change

Cfwd Mode
3. No Answer X
Done Change

Cfwd Mode
4. All Off
Done Change

Cfwd Mode
5. All On
Done Change

Indicates

CFWD Enabled

CFWD Disabled

Indicates

no CFWD

phone number

configured

Summary of Contents for 6863i



































































































































































Search results

Summary of Contents for 6863i

Reviews:

Related manuals for 6863i

Brands by name

Popular brands

Mitel 6863i, User Manual

Search results

Summary of Contents for 6863i

Reviews:

Related manuals for 6863i

Brands by name

Popular brands