Mitel 6863i User Manual Download Page 117

Page: 117 / 162

Managing Calls

115

The following describes the key behavior for each DND mode.
•

Account: The DND key toggles the account in focus on the IP phone UI, to ON or OFF if

DND enabled for that account.

•

Phone (default): The DND key toggles all accounts on the phone to ON or OFF.

•

Custom: The DND key displays custom screens on the IP phone UI. User can select whether

to enable/disable DND per account, enable DND on all accounts, or disable DND on all

accounts.

CONFIGURING A DND KEY

To configure a DND key, see the section,

“Do Not Disturb (DND) Key”

page 65

CONFIGURING DND USING THE MITEL WEB UI

Click on

Basic Settings > Preferences > General

In the

DND Key Mode

field, select a DND mode to use on the phone. Valid values are:

Account, Phone (default), Custom. Default is Phone.

Notes:

If you make changes to the configuration for DND via the IP phone UI, you must

refresh the Mitel Web UI screen to see the changes.

If DND is enabled for an account, the Message Waiting Indicator (MWI) LED will

turn on when the DND-enabled account is in focus.

Note:

If there is no

DND

key configured or if it is removed, DND is disabled on the IP

phone.

MITEL WEB UI

Summary of Contents for 6863i



































































































































































Search results

Summary of Contents for 6863i

Reviews:

Related manuals for 6863i

Brands by name

Popular brands

Mitel 6863i, User Manual

Search results

Summary of Contents for 6863i

Reviews:

Related manuals for 6863i

Brands by name

Popular brands