Mita DP-1400, Instruction Handbook Manual

Page: 99 / 134

5.5 Indicators and Messages
5-9
Load Cassette #
(paper size)/(paper type)
*(paper size) and (paper
type) are displayed flashing
alternately.
There is data for printing that matches with a paper cassette setting (paper size, paper
type), but there is no paper in the cassette.
Set paper into the paper source as displayed on the control panel, and press the
CONTINUE
key to restart printing. However, the paper source number (
#
) is only dis-
played when there is an optional paper feeder installed.
Or, if you want to print from a different paper source press the
FEED
key to display
Use
alternative?
and you can change the source for paper feeding. Further, you can
change the paper source by pressing the
FEED
key.
After selecting a paper source and pressing the
MODE
key,
Paper handling >
appears. By pressing the key, the paper type settings menu appears. After setting
the correct paper type, press the
EXIT
key and printing starts.
Load MP tray
(paper size)/(paper type)
*(paper size) and (paper
type) are displayed flashing
alternately.
There is no paper cassette set (paper size, paper type) that matches with the data for
printing .
Because there is no cassette that matches the data, printing is done from the MP tray.
Set paper into the MP tray that matches the paper size and type shown on the display
and press the
CONTINUE
button to restart printing.
Or, if you want to print from a different paper source press the
FEED
key to display
Use
alternative? and you can change the source for paper feeding. Further, you can
change the paper source by pressing the
FEED
key.
After selecting a paper source and pressing the
MODE
key, Paper handling >
appears. By pressing the key, the paper type settings menu appears. After setting
the correct paper type, press the
EXIT
key and printing starts.
Call service
personEn:0123456
Mechanical error (n=
0
,
1
,
2
, ...)-Call a service person. The printer does not operate
when a message beginning with
E
is displayed. The total number of pages printed is
also indicated.
Call service
personFn:0123456
Controller error (n=
0
,
1
,
2
, ...)-Call a service person. The printer does not operate
when a message beginning with
F
is displayed. The total number of pages printed is
also indicated.
Message Corrective Action