Mita DP-1400 Instruction Handbook Manual Download Page 76

Page: 76 / 134

2.15. Setting the Audio Warning (Buzzer)

2-28

The alarm will continue to sound while the error condition continues (if the printer is in the sleep mode, the
alarm will be silent for that period alone). The alarm will cease to sound, however, when the

CANCEL

key is

pressed.

To rectify the various error conditions listed above, please refer to

Chapter 5

of this manual, or to the oper-

ating manuals accompanying the various optional equipment.

☛

If you wish to cancel the data being processed while the audio alarm is sounding, press the CAN-

CEL key twice. Firstly, the audio alarm will be turned OFF, and then the data processing will be

canceled.

After the audio alarm has been set to OFF, even if the PRESCRIBE 2e FRPO INIT command is exe-

cuted, the printer will not return to the initial (ON) alarm setting. To set the audio alarm to ON,

reset using the mode selector menu from the control panel.

Summary of Contents for DP-1400







































































































































Search results

Summary of Contents for DP-1400

Reviews:

Related manuals for DP-1400

Brands by name

Popular brands

Mita DP-1400, Instruction Handbook Manual

Search results

Summary of Contents for DP-1400

Reviews:

Related manuals for DP-1400

Brands by name

Popular brands