Mita DP-1400, Instruction Handbook Manual

Page: 126 / 134

Mode Select Menu
>OPT. StatusPage
Off
>NetWare >
On
>TPC/IP
Off
>NetWare >
On
>NetWare
Off
>Ether Talk
Off
Interface >
Option
Emulation
Line Printer
>Print KPDL errs
On
>Print KPDL errs
On
>Parallel I/F
Normal
>Parallel I/F
High Speed
>Parallel I/F
Auto Interface >
Serial
Ready
PAR 600 A4 001
>Parallel I/F
Nibble (high)
Print
Menu map
Interface >
Parallel
>Data bits
8
>Stop bits
1
>Protocol
DTR (pos.)&XON
>>NetWare Frame
Auto
>>DHCP
OFF
>>IP Address
>>Gateway
>>Subnet Mask
These items willl not show unless the printer is
installed with the applicable option unit/kit.
Basic Operations During Mode Selection
This diagram gives quick reference to all menu options and
their sequence of selection. Use this description in combina-
tion with Chapter 2 Mode Selection Menu .
1.
Press the MODE key to enter Mode Selction mode.
2. Press the + or – key repeatedly until the message display indi-
cates the desired item.
3. Press the key to move to a submenu. Press the key to
return.
4.
Press the ENTER key once the desired menu appears.
?
will flash,
and the current setting can be changed.
5.
Press the + and – key to select the desired setting.
6.
Press the ENTER key.
If you want to re-enter a setting, press the CANCEL key before
pressing the ENTER key.
7.
Press the EXIT key. This will enable currently selected settings.
Emulation >
PCL 6
>Print KPDL errs
Off Emulation >
KPDL
(*1)
(*2)
Emulation >
KPDL (AUTO)
>Print KPDL errs
Off
(*2)
Emulation >
DIABLO 630
Emulation >
EPSON LQ-850 >Code set
LQ US
Continued on next page
Emulation >
IBM Proprinter
>Code set
DIABLO US
>Code set
IBM US
>Alt. Emulation
PCL 6
>Code set
ISO-6 ASCII
>Parity
None
>Baud rate
9600