![background image](http://html1.mh-extra.com/html/mircom/fa-300-series/fa-300-series_installation-and-operation-manual_1805754082.webp)
82
Configuration with the CFG-300 LCD Service Tool
11.11.2 Command Menu/Dialer Config-->Telephone Line
Note:
Refer to 11.2.1 Using the Keypad to Program the FA-300 on page 61 for detailed
instructions on making menu selections.
Command Menu/Dialer-Config/Telephone Line
1. Line#1 Dialing Type
[X] DTMF Dial->Default
[ ] Pulse Dial
Set the dialing type for line
#1; this is the type
recognized or preferred by
the telephone company.
Command Menu/Dialer-Config/Telephone Line
2. Line#2 Dialing Type
[X] DTMF Dial->Default
[ ] Pulse Dial
Same as Line#1.
Command Menu/Dialer-Config/Telephone Line
3. Line#1 wait for Dial tone
[X] ENABLE ->Default
[ ] DISABLE
Use this menu to let the
system know whether or not
to wait for a dial tone before
dialing. Cell phone setup for
the dialer requires that the
system not wait for dial tone
before dialing.
Command Menu/Dialer-Config/Telephone Line
4.Line#2 wait for Dial tone
[X] ENABLE ->Default
[ ] DISABLE
Same as Line#1.
Command Menu/Dialer-Config/Telephone Line
5.Number of retries
06 ->Default
Set the number of retries for
both line#1 and line#2. This
function lets the dialer retry
on either line if it is busy or
not available. If the retry
count expires, the panel
reports a line trouble.
i
1 L i n e 1 D i a l t y p e
2 L i n e 2 D i a l t y p e
3 L i n e 1 D i a l t o n e
4 L i n e 2 D i a l t o n e
- T e l e p h o n e L i n e -
5 N u m o f R e t r i e s
L i n e # 1 D i a l i n g T y p e :
[ X ] D T M F D i a l
L i n e # 2 D i a l i n g T y p e :
[ X ] D T M F D i a l
L i n e # 1 W a i t D i a l t o n e
[ X ] E N A B L E
L i n e # 2 W a i t D i a l t o n e
[ X ] E N A B L E
N u m b e r o f R e t r i e s :
0 6
Summary of Contents for FA-300 Series
Page 2: ......