NV9607 Control Panel • User’s Guide
15
4. Configuration
Chapter 4 provides configuration instructions for the NV9607. It presents the following topics:
•
•
Adding a Panel to an NV9000 Configuration
•
NV9607 Panel Configuration Page
•
•
•
•
Multi-Destination Configuration
This chapter addresses configurers. Operators and other persons not interested in NV9607 configu-
ration need not read this chapter.
Summary
The NV9607 is a relatively simple panel. It has 116 function buttons and a small display. Although
it has relatively few button functions, there are 4 operating modes.
•
.
•
•
Single-Destination Mode with Breakaway
.
•
The set of button functions varies from mode to mode.
NV9000-SE Utilities is the software with which to configure the NV9607. Figure 4-1, following,
shows the default NV9607 panel configuration page from NV9000-SE Utilities.
Adding a Panel to an NV9000 Configuration
You must create configurations for the NV9607 using NV9000-SE Utilities. We assume that you
are familiar enough with NV9000-SE Utilities that you can understand the following material. It is
not difficult material, but some of the concepts might not be familiar to everyone.
It takes only a few seconds to add a new panel configuration.
Summary of Contents for NV9606
